Wake and Whimsy


Leave a comment

DIY: Handmade Love Notes

note025

You will need:

  1. paper
  2. stick glue
  3. Washi tape or stickers
  4. scissors

leaf

I like to use double sided paper, like the picture below, or origami paper. The origami paper is easier to fold, but usually only has a pattern on one side. The paper pictured below is a little more sturdy, and you get to see pretty patterns on both sides. These usually already come in a square shape, but if you have paper that isn’t square, just cut where necessary to make it the same length on all 4 sides.

note023

First, choose the side of the paper that you want to be the outside of the envelope, and lay it face down. The “inside” of the envelope will be face up. Follow the folding pattern below.

note020

Once you reach step 7, mash the creases down really good so that you have some deep lines, and then unfold it as shown in step 8. Place some stick glue where the arrows are pointing, and fold it back together.

note021

Now you will most likely need to cut your own paper for the note that is going inside the envelope. Just trace along the bottom of the envelope leaving a little space on either side. Next, trace up to the top crease of the envelope, once again leaving a little space. After cutting out your note, you may need to trim it a little to make it fit just right. Another option is to use whatever paper you’d like, and just fold it up to fit inside.

note022

Now write something sweet, stick it inside, and seal it with some cute Washi tape!

note024

arrow

These one-of-a-kind notes are great for thank you notes, Valentine’s, love notes, gift tags, etc…the possibilities are endless. The handmade envelope and custom sized paper really makes a big difference in making someone feel special. A gift is always better when it is obvious that the giver put in some extra effort and extra love! Enjoy ❤

 

 

 

 

 

 

Advertisements


2 Comments

DIY: Gold Dipped Kitchen Canisters

Earlier this week, I purchased these old kitchen canisters at a local consignment store. They were selling the entire set for $1.00, so I couldn’t pass them up! There are 3 tall ones and one shorter one, which I thought was kind of unique. They are just acrylic, air tight containers, with a rather ugly pattern on them. But of course, I saw them as much more than that. Luckily, they were in great condition, especially on the inside where it really counts.

KC011_6

So the first thing I did was clean them up really good, inside and out. Once they were dry, I gave them a couple coats of antique white spray paint. The metal latches were a little difficult to cover completely, but I actually really like the way it looks with some of the metal coming through. It gives it a nice vintage, industrial feel almost. So, I decided not to go all out on the latches, and just leave them a little patchy with the paint.

KC004_5KC005_1

Once they finished drying, I free handed the “labels” on them myself with a black paint marker. Most of the time you see labels on the front of these, but I decided to do something different and put them on the top. Plus, the hardware is kind of big which didn’t leave much room to put them on the front anyway. If you don’t feel comfortable free handing them, there are tons of tutorials and printables out there on Pinterest for kitchen canister labels!

KC017_9

Lastly, (this is the fun part), I wrapped some painters tape around them, and spray painted the bottom with metallic gold paint. I had literally been DYING to use this paint for something, and this just seemed like the perfect project to do so.

KC015_8

KC006_2KC007_3KC008_7

I really love how this project turned out. The gold on the bottom of my canisters matches perfectly with the copper hanging basket in my kitchen. The finish on them ended up being a little textured in some spots, but that is mostly because my spray painting skills need some work! But, it doesn’t bother me. I think it actually adds even more character, which is always a plus in my book. So, the moral of the story is that when you see something useful in a thrift store or a consignment shop, don’t pass it up just because it’s ugly and outdated–especially if they are selling it at a great price. There is usually always a way to make it into something beautiful that you will enjoy for years to come.


11 Comments

{basically} Free Wall Art: DIY

If you are looking for some free, custom wall art, this is the tutorial for you. Here is how you can transform black and white printed pictures into colorful works of art! You will need standard sized paper that you can put in a computer printer. I used just regular printer paper, but I recommend finding something that has a little more weight to it so that it doesn’t wrinkle up from the water. The size is usually 8.5″ by 11″. You’ll also need a printer, watercolor paint and paintbrush, and an 8.5″ by 11″ picture frame. I was able to find my frames at the Dollar Store!

***these images do NOT belong to me***

BFF

art05

So the first thing you’re going to do is find the pictures you want to print out. Be specific with your search, and make sure you search for “black and white”. You want the picture to have a lot of definition and depth to it. If it looks too “cartoon-ish”, then your final product is not going to look very good. As you can see, the ones that I chose have a lot of shading. I chose pictures that have more than just an outline.

Now you just need to add some paint. Watercolor is really the only thing that’s going to work for this, so don’t try to use acrylic or just any kind of craft paint. When you are painting, be really careful not to get too much water on the paper, because this will make the paper all wrinkly. If you have paper that is a little more thick, that will make it easier. Just keep dabbing your paintbrush on a paper towel to get rid of excess water. This makes the process a little longer, but it’s worth it! To get the right effect, paint mostly just on the parts that are white. Don’t get too much paint on the black areas or your picture will end up looking “muddled” and all smudgy. If you do get too much water on there, or you get too much paint on the black areas, just quickly use your paper towel to dab it off. Think of your paint as just an accent to the picture. It looks kind of neat when you leave some of it black and white.

A little patience and a little practice is all it takes to turn these printed pictures into colorful art. I was actually really happy with the way mine turned out! This is a really easy project, it just takes some time and precision. With that being said, it may be a good idea to do a practice run first. But if I can do it, so can you!

Enjoy!

art04


Leave a comment

At Home: DIY Round-Up

Made with Repix (http://repix.it)

As this month comes to a close, I have been reflecting on all the fun projects I’ve been working on for our very old, new house. With it being our first home, we can’t help but put so much energy and work into it to make it feel like ours. Since we are on a tight budget, and just because I love making things, almost all of the decorative items in our house are/will be handmade, DIY projects. Sometimes, yes, it would be nice to go shopping and buy a lot of shiny, new things. But my love for handmade pieces has grown exponentially in the past few years, and I know how meaningful and unique they are. Since this house is so very special to us already, it only makes sense to fill it up with the things that are most special to us. Obviously, that would be the things we make with our own hands; the things we make with love.

Here is a quick round-up of some of my favorite projects from September.

DIY Pillowcases

Made with Repix (http://repix.it)

Making these is so fun, and incredibly easy. I bought 4 pillows at the thrift store that were very close in size. These were only around $2 a pillow–insane! Then I went to the craft store and chose the fabric. (I made sure to put them in the washing machine before adding fabric) Custom made pillows are not something you see in every home, and these are actually less expensive than any you would buy already made. Here is the awesome tutorial that will blow your mind and make you say, “Why didn’t I think of that?”

 

Wooden Initial

Made with Repix (http://repix.it)

Once again, adding those personal touches really makes a big difference. Our last name starts with a “K”, so I knew I wanted one in our house somewhere. I bought this plain, wooden letter at the craft store for around $4. I spruced it up using some acrylic paint that I already had on hand. I painted it black first, then added some soft yellow for a worn, vintage look. Another way is to paint it yellow first, or whatever color you choose, then paint over it. Once it dries, you can scuff it up with some sand paper so that the bottom color comes through.

Embroidery Hoop Art

home006

I love the homemade, vintage feel that embroidery hoops offer. These are pretty self-explanatory. There are a variety of sizes you can choose from, and I have found that a quarter of a yard of fabric will work for any size. Between the hoop and fabric, I paid less than $4! You can add felt or buttons, like I did, to personalize it and make it a little more special.

Old Windows

Made with Repix (http://repix.it)

I’m not sure if you’ve noticed yet, but I really love anything old/vintage/antique. Old windows are definitely a favorite of mine. You can usually find them for around $7-$10 at thrift stores, flea markets, or consignment shops. There are so many possibilities! Obviously, I turned this one into a beautiful picture frame using twine and mini clothespins. It serves as a beautiful focal point in our living room.

home011

Here is another option that I love. This is an old window, turned chalkboard, that we are using as a message board in our kitchen.  I did not use chalkboard paint for this. I actually used chalkboard contact paper! The contact paper cost me a whopping $3 as opposed to the $15-$20 I would have spent on paint and primer. It works just as great as a normal chalkboard, it erases easily, you can gently wash it with warm water if needed, and if you decide you don’t want it anymore or want to replace it….just peel it off! So easy, quick, cheap, useful, and beautiful. Not to mention it adds a ton of character to any room.

Fall Wreath

home010home002

I’m sure you’ve seen a ton of these already, but I still love them. Although it’s not a new idea, the design can always be new and fresh. The Styrofoam ring was around $5, and I already had the other supplies on hand. I just wrapped it with yarn, and embellished it with ribbon and felt flowers.

There you go: 5 quick, cheap, easy projects that anyone can do. I hope you feel inspired, and are ready to accomplish some DIY’s of your own!